The QS 100 roller shade utilizes the ultra-quiet, precision controlled electronic drive unit. Housed inside the roller shade assembly, the QS 100 controls the movement of the shade while keeping track of the shade's position.
FEATURES & BENEFITS
- Ultra quiet operation
- Shades move in perfect unison and provide exact alignment within 0.125 inches at all times
- Smooth, silent stops and starts
- Offers programmable stop points
- Provides maximum window coverage with the smallest possible light gaps .75 inches between the fabric and window frame
- Light gaps are symmetrical on both sides of the shade
- Easy to use and easy to read controls
- No group controls or relay systems to creat shade groups or sub-groups
POWER
- Operating voltage: Low Voltage, Class 2, 24V power supply required
- Control system power supply offers (spike and brownout) overvoltage protection (+/-10% of line voltage) for all devices in the system
- Power supply provides appropriate Electro Static Discharge
SYSTEM CAPACITY
- System, allows for a total of 100 devices, QS shades, power supplies, keypads, and Grafik Eye
- System allows for a total of 100 zones, including shades and Grafik Eye
- Maximum size of shade fabric per Unit is 100 square feet
PERFORMANCE
- System allows for symmetrical light gaps as small as ¾" on each side
- Each Unit stores presets positioned at any stop put along the shade’s travel, as well as full open and full close shade limits
- Each Unit is capable of stopping with the accuracy of ⅛" in steps for the entire travel or the shade
- Preset points can be located at any point between the open/close limits and are adjustable with a 5 second button push and hold from QS keypads or QS Grafik Eye
- For systems with multiple units, shades smoothly move in unison and exact alignment within ⅛" accuracy at all times
- Limits are programmable and adjustable from the units, wall mounted QS keypads and/or QS Graphik Eye
GROUPING
- System keypads can control any unit, group or subgroup without a separate group controller or additional interface
- System groups or subgroups can be reconfigured at the point of control with out rewiring and without access to the unit
- Controls within this system are able to operate any group or subgroup of the unit regardless of the window treatment type
INTEGRATION
- Units seamlessly integrate with lighting controls and QS Grafik Eye without a separate interface
- Contact closure RS232, and Ethernet available to integrate with AV equipment such as timeclocks and security systems
CONTROLS
- QS shades can be controlled by built-in shade columns on a QS Grafik Eye or QS keypad
- QS keypads are low voltage
- Microprocessors are contained in the unit, QS Grafik Eye and QS Keypads, allowing for a higher level programming from either source
- All QS shades, QS Grafik Eye and QS keypads are wired together on the same communications link
