|
What is the difference between pre-fabricated and site installed panels?
The Track-TexTM System, DFB’s site-installed wall upholstery, is created by a frame work of rigid vinyl channels. After a variety of panel filings are added, the fabric is stretched onto the framework and locked into place with the exclusive Track-TexTM Power Lock Jaw. Since this is all of done on the job site, our installers can install the Track-TexTM system based on shop drawings; no pre-measuring is necessary. The Track-TexTM panels can be adjusted to create the appearance of one continuous and seamless wall making it the perfect system for fine fabrics and material.
The Panel-Tex System is DFB’s pre-fabricated system made right here in Long Island City. Since the panels are made in the shop and then delivered to the site, preliminary measurement is necessary by our installers. Panel-Tex does not use the Power Lock Jaw to secure fabric into place but instead uses an adhesive.
What types of fabrics are suitable for upholstered panels?
Almost any solid color fabric, unbacked or acrylic backed can be used. Heavy patterns are best suited to out Track TexTM System. Paperbacked fabrics are not usable. All “Panel Fabrics” can be used as is. Acrylic backing is used to stabilize certain fabrics that tend to stretch indefinitely. Silk must be always backed. Rayon, nylon and blends of these yarns should also be backed. Leather is another beautiful option for wall upholstery. Discuss all the possibilities with your sales representative.
Can Track-Tex be used on projects attaining LEED Certification?
Yes! DFB has re-engineered the fabric wall system and are introducing Green Track-TexTM to Building and Design professionals.
The product's attributes are:
- LEED Materials & Resources Credit 4.1 and 4.2 for Recycled Content (LEED NC 2.1 and 2.2 as well as LEED CI 2.0)
- LEED Materials & Resources Credit 5.1 for Regional Materials (LEED NC 2.1 as well as LEED CI 2.0)
- LEED Materials & Resources Credit 6 (LEED NC 2.1 as well as LEED CI 2.0)
- LEED Indoor Environmental Quality Credit 4.2 (LEED CI 2.0)
The other piece of the sustainability puzzle, of course, is the fact that DFB is a local manufacturer. We employ over 100 people who live and support families in New York Metro Area.
What are the fill choices? How do I choose?
There are three choices: Dacron, Micore, and Fiberglass. Dacron is soft and has minimum acoustical properties and gives a “Puffy” surface. Micore is tack-able and has very little acoustical properties. Fiberglass has very good acoustical properties and should not be used as a tack-able surface.
What kinds of details are available?
The edge details available are square butt; radius and bevel edges.
What happens if the fabric sags?
Fabric is re-stretched in place by unhinging the track and re-stretching the material until taut.
What happens if the fabric is damaged?
Fabric is removed from the Track Tex System and replaced with a new piece of fabric.
What do you do about cutouts?
Cutouts are made in the field by our installers. This includes switches, outlets and any other functions that would otherwise be hid behind the panel.
Can I get grounds built in for pictures?
Yes, can be added anywhere you want.
What is the maximum size of panels?
Only limited by the fabric width, less 2”, for standard panels and virtually unlimited for sewn-seam applications.
Can I mix acoustical and tack-able?
Yes, Mixing acoustical and tack-able is allowed.
How thick can I make the panel? What are the advantages?
Standard thickness for all panels is 1”. However, if greater sound absorbency is required for a specific application, fiberglass panels can be made up to 4” thick. Panels can also be fired out to meet abutting surfaces.
What does NRC mean?
Noise Reduction Coefficient (NRC) Average sound absorption coefficient measured at four frequencies: 250, 500, 1,000, and 2.000 Hz expresses to the nearest integral, multiple of 0.05. Rates of ability of a ceiling or wall panel or other construction to absorb sound. NRC is the fraction of sound energy, averaged over all angles of direction and from low to high sound frequencies that are absorbed and note reflected. |
