TRACK MEMBERS: All track members shall be extruded aluminum not less than .950-in. wide and .700-in. high and shall contain carrier wheels within channels. Track shall be extruded with two (2) channels to receive sliding mounting brackets, positionable as required.

MOUNTING BRACKETS: Mounting brackets shall be extruded aluminum with an "L" shaped leg which slides into the receiving channels of the track and is affixed to the mounting surface with screws or rivets. All exposed aluminum surfaces are to be clear or dark bronze anodized or powder-coated white. Custom colors can be submitted.

CARRIERS: Carriers compatible with the track shall be composed of a body and wheels made of self-lubricating white Delrin, and an eye or hook assembly of .093-in-diameter bright nickel-plated wire. Lifting wires shall be a minimum of .062-in.-diameter stainless steel, PVC coated, and shall pass through Delrin glides with brass eyelets built into the carrier body. Lifting wires shall not be visible from the face of the shade. Battens shall be anodized aircraft aluminum rods no Less than 3/16 in. O.D. and shall be contained within horizontal, back-facing pockets spaced 9 in. apart. Headrail shall be 3/4 in. x 1 1/2 in. and shall be completely covered by the shadecloth.

BOTTOM RAIL: Bottom rail shall be constructed of extruded aluminum with continuous spline channel at top for shadecloth attachment. All exposed aluminum surfaces are to be clear or dark bronze anodized or power coated white. Custom colors can be submitted.